| Home 
  | Newbies Guide | Technical Resources 
  | Lada Niva Clubs | Niva 
  Lift Kits | Gallery | Links 
  |
 
  The low-ratio gears in the Niva's transfer-case can be swapped for a lower ratio 
  set to give better low-speed crawling ability, commonly refered to a rock-crawler 
  gear set. 
There are several commercially available sets (LadaSport in Germany sell a choice of gear sets for around 600 Euro), or you can make you own set by modifying a 3rd gear from a old gearbox to fit (ie the "French" TC crawler mod).
LadaSport 
  
 in Germany offers 
  the following options:
  2,502/1,205 - 17 % reduction
  2,712/1,205 - 27 % reduction
  3,152/1,205 - 46 % reduction
LadaShop 
  
 in Russia also offer 
  sets, but their site refuses to works in my browsers, so I can't tell you anything 
  about it. 
Protrack 
  
 in Greece offers 
  the gears for sale and instructions of how to modify the case.
French TC crawler mod  
  
  DIY instructions: page 1 (350K) 
  :: page 2 (800K) (Original: 
  Nivaventure
/Fabrice)
Swedish 
  version 
 
  
  The Sweds have developed a version, here's Ahma's 
  build notes
, 
  And Youtube vids below. They may be selling kits soon (Ahma 
  & Niva-Micke)
Here's a sequence from Ahma showing 
  how to make the Swedish version:
  
  ![]()
  
  ![]()
  
  ![]()
  
  ![]()
  
  ![]()
  
  ![]()
  
  
 
   
Another option could be twin transfer-cases; though they'd hang so low this is probably only a realistic option for very lifted Nivas.
Low-ratio 1st gear Gearbox swap
| Home | Newbies Guide | Cloggy's DOHC | Lada Niva Clubs | Niva Lift Kits | Gallery | Links |
Please read the General Disclaimer near the bottom of this page