| Home
| Newbies Guide | Technical Resources
| Lada Niva Clubs | Niva
Lift Kits | Gallery | Links
|
Right-click "view image" for bigger images.
Front diff and sump guard (no roll-bar)
All-in-one: Sump, front diff, gearbox and TC guard (with roll-bar)
And here's the all-in-one's mounts (bolted through the chasis)
Another one piece
This one is available from F-Design
And a 2 piece
Rear diff guard, rear view (Lior)
Rear diff guard, front view (Lior)
The Brazilian
The Russian
Aftermarket diff, sump, floor and inner-arch guards
Other armour:
Rear suspension lower arms reinforced with angle section (check local regulations,
if welding isn't allowed hose-clamps can work). Some people also put an angle
section protector on the panhard rod.
Sill guards - here's how to
make some
Reinforced bumper iron
- "...weld a plate to cap the end of the iron off inside
the chassis, Kind of a circle of steel welded to the end of it. I used 3mm steel
and I never managed to rip them out (nearly given myself whiplash trying though!)
" Simon Allen
Also see:
Build your Niva to survive the Paris-Dakar Part 1 (1M) and Part 2 (1M)
| Home | Newbies Guide | Cloggy's DOHC | Lada Niva Clubs | Niva Lift Kits | Gallery | Links |
Please read the General Disclaimer near the bottom of this page