| Home | Newbies Guide | Technical Resources | Lada Niva Clubs | Niva Lift Kits | Gallery | Links |

Hoodoo lift fitting instructions (Jonno).

The tried & tested DIY Hoodoo 2" (50mm) Lift consists of short and long wedges between the lower wishbone and coil-platform, and spacer rings between the rear coil and floor.

Download the zip file download Hoodoo Lada Niva Suspension Lift Mod MK1 (John Pugh, UK).

More information about Niva lifts can be found at my lifts page.

Over to Jonno...

Also see:

Various DIY Niva lifts - almost all there is to know

| Home | Newbies Guide | Cloggy's DOHC | Lada Niva Clubs | Niva Lift Kits | Gallery | Links |

Please read the General Disclaimer near the bottom of this page